Product manual

Installing Advanced Server for UNIX Installing the prerequisited packages

Product Manual U7613-J-Z815-6-76

Example entries in names.cfg:

Note that both the server name (“mypdc”) and the domain name (“mypdc.dom”)

must be given together with the server's IP address.

or (as an alternative):

Ê Edit the file

/var/opt/nbrfc/conf/interfaces.cfg and configure the IP address of the primary

controller’s subnet in the appropriate interface section using the parameter

“brdcast_list=”:

Example entry in interfaces.cfg:

If the

brdcast_list line is commented out (default), do not forget to uncomment the

line!

To ensure that the primary domain controller can be found if this server is a WINS

client:

Ê Edit the file

/var/opt/nbrfc/conf/wins.cfg and add the appropriate WINS server addresses.

For detailed information on configuring name resolution, refer to section “Configuring

NetBIOS Name Resolution”.

In any case, you should now reboot the system before proceeding with the instal-

lation of the server software.

# My primary domain controller

mypdc 144.145.101.10 UN

# The domain I want to join

mypdc.dom 144.145.101.10 UN #1b

[et0]

active=yes

used_by_wins=yes

ip_addr=default

brdcast_addr=default

# Subnet address of my primary domain controller:

brdcast_list=144.145.101.255

netmask=default