Advanced Server Overview and Installation

Lanman.ini File Parameters
Product Manual U7613-J-Z815-6-76
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: D:\O7613e6\u7613e.k14
prebinduxredir Controls the name that the UNIX system Net command
binds when it uses the UNIX system redirector
(uxredir). If this parameter is set to yes, the server pre-
binds a NetBIOS name that will be used by all UNIX
system Net commands. Because this name is pre-
bound, the Net command does not need to bind its own
name, and this quickens the UNIX system’s Net access
to the server. If this parameter is set to no, then each
Net command will use its own unique name with
somewhat slower performance resulting.
If the Advanced Server NetBIOS names are
registered dynamically with a WINS server, you
should not set prebinduxredir to no, as
otherwise the WINS database can become
extremely large because of the different names
for the individual Net commands.
Values: yes, no; default: yes
secsources The names of the modules that can write to the security
log.
Default: The server initializes the value of this
parameter at startup.
srvstathelpfile The location of the help file used by the Activity Monitor.
Default: /var/opt/lanman/msgfiles/001/srvstat.hlp
stacksize The size of the stack, in bytes, for each task internal to
the server.
Values:12000 - unlimited; default: 30000
syssources The names of the modules that can write to the system
log.
Default: The server initializes the value of this
parameter at startup.
tcp_nodelay Since AS/X V4.0B, the tcp_nodelay parameter
is no longer supported. The functionality will be
set by a parameter when NetBIOS is started.
See the chapter “Configuring NetBIOS”.
[lmxserver] Section Parameters
Parameter Description, Values, and Default Setting
(continued)
!
!