Advanced Server Overview and Installation

Advanced Server Registry Lanman Server Parameters

Product Manual U7613-J-Z815-6-76

AutoDisconnect REG_DWORD

0 - 3600 (60 hours)

Specifies the interval in minutes that the server waits before dropping the virtual circuit

to an inactive client.

Default: 0 (no automatic disconnect)

You can change the value of this key using the AS/U Administrator.

EnableSecuritySignature REG_DWORD 0 or 1

Specifies whether SMB signing is enabled on the server. SMB signing provides mutual

authentication which prevents "man-in-the-middle" attacks. SMB signing imposes a

performance penalty on the system. Although it does not consume any additional

network bandwidth, it does use more CPU cycles on the client and server side.

Default: 0

ErrorAlert REG_DWORD 0 - infinity

Specifies the number of errors that can occur before the server sends an alert to the

alertnames list.

Default: 5

You can change the value of this key using the AS/U Administrator.

Hidden REG_DWORD 0 or 1

Specifies whether the server is hidden on the network. If the server is not hidden, it

announces its presence set in the SrvAnnounce and LmAnnounce keys.

Default: 0 (server is visible)

You can change the value of this key using the AS/U Administrator.

LmAnnounce REG_DWORD 0 or 1

Specifies whether a server should announce itself with the old LAN Manager-type

announcement in addition to the new Windows NT-type announcement. This key has

an effect only if the value of the Hidden key is 0.

Default: 0 (Use only Windows NT-type announcement.)

You can change the value of this key using the AS/U Administrator.

LogonAlert REG_DWORD 0 - infinity

Specifies the number of logon violations that can occur before the server sends an alert

to the alertnames list.

Default: 5

You can change the value of this key using the AS/U Administrator.