User's Manual

TC12 Installation, Commissioning & Maintenance Handbook
Engineering and Special Function Commands
The following commands are for engineering diagnostic use only and would not
normally be required for maintenance operations. Refer to Siemens Engineering
for further information.
3.3.3.86 Scheduler Dummy Routine Control (GDC, KDC)
3.3.3.87 Engineering Display Base (GEB, KEB)
3.3.3.88 Display Engineering data Items (GEG, KEG)
3.3.3.89 Display Engineering RAM data (GER, KER)
3.3.3.90 Display Processor Free Time (GFE, KFE)
3.3.3.91 Display Power-Up Data (GPU, KPU)
3.3.3.92 Run Time Monitor (GRT, KRT)
3.3.3.93 Display Soft Error Count (GSC, KSC)
OTU development test commands
The following commands are for OTU development test purposes only.
3.3.3.94 Message Count (Bit Error Test) (GMC)
3.3.3.95 Bit Error Count (GBE)
3.3.3.96 Modem Override (Test) (GMO)
666/HE/43100/000 Page 116 Issue 9