User's Manual

TC12 Installation, Commissioning & Maintenance Handbook
KFD 1 = (input number: 0 - 31) (255 to disable).
tate input driven by the actual flashing
Note 1.Only one of the above input types must be configured.
This allocates a mains s
supply.
Note 2.The 32 inputs are numbered 1 to 32 in section 3.2.3.5, corresponding to
the associated pin on the 40 way input connector, however the handset
command numbers the inputs from 0 to 31, for the 32 inputs.
666/HE/43100/000 Page 105 Issue 9