User's Manual

Automation and Drives - SCE
T I A Training Document Page 6 of 64 Module
Hardware and software required
1 PC, operating system Windows 2000 Professional starting with SP4/XP Professional starting
with SP1/Server 2003 with 600MHz and 512RAM, free hard disk storage 650 to 900 MB, MS
Internet Explorer 6.0
2 Software STEP7 V 5.4
3 MPI interface for the PC (for example, PC adapter USB)
4 PLC SIMATIC S7-300 with at least one analog input/output module to which, at one analog
value input, a potentiometer or another analog signal transmitter is connected. In addition, an
analog value display has to be connected to at least one analog output.
Sample configuration:
- Power supply: PS 307 2A
- CPU: CPU 314C-2DP
5 Controlled System
6 Connection lines for connecting the controlled system to analog inputs and outputs of the
PLC
2 STEP 7
1 PC
Preface Fundamentals Discontinuous Action Controllerr Controller Block (S)FB41 Setting the System Appendix
4 S7-300 with
CPU 314C-2DP
3 PC Adapter USB
6 Connection Lines
5 Controlled System
B3
Issued: 02/2008 Control Engineering with STEP 7