Technical data

Configure the unit
23
Siemens Building Technologies
Fire Safety & Security Products 12.2007
6.6 Fast SMS configuration
This is the window to customize the SMS that will be triggered at Input 1.
When Input 1 is shorted to ground (pulse), the custom SMS will be sent to the
phone number entered in the SMS configuration window. If the SMS protocol is not
selected in the field Selected protocols, then no SMS will be sent.
As an additional feature, when this input is shorted to ground, an event "General
Alarm" will be sent in CID (number 140), beside the custom SMS.
For the CID event to be sent, select the CID protocol in the field Selected
protocols. This event will be sent to the phone numbers entered in the contact ID
configuration window. If there was a kiss-off of this event, the reporting will stop. If
there wasn't a kiss-off of this event, the event will be reported to the next phone
number (if there is any). If you leave these fields blank, then no SMS and no CID
will be sent.
1. Click the button
.
Î The window Fast SMS opens.
2. Make you configuration.
3. Click the button
.
Î The configuration is finished.