Technical data

Configure the unit
21
Siemens Building Technologies
Fire Safety & Security Products 12.2007
6.5 Remote access configuration
In this window you can setup the remote configuration.
There are 2 security levels:
z Only password
z Password and telephone number. The telephone number will be used to get
connection from the local unit to this unit, in order to figure this unit remotely.
Make sure that your telephone can display the incoming phone number.
1. Click the button .
Î The window Remote access configuration opens:
2. If remote access is not to be allowed, press the button Remote access dis-
able.
3. If the authentication requires a password, press the button Check password.
Î The window Enter password opens:
If previously no password was used, the field old password will not appear.