Technical data

Configure the unit
14
Siemens Building Technologies
Fire Safety & Security Products 12.2007
6.4 Protocols
The following protocols can be used simultaneously:
Reporting
media
Reporting format Reporting priority Symbol Section
TCP/IP CID 1 6.4.1
GPRS CID 2 6.4.2
GSM SMS 3 6.4.3
If both GSM and TCP/IP protocols are selected, the data will be sent only via TCP/IP. If TCP/IP fails,
the data will be sent via GSM.
1. Select the required protocols from the Available protocols.
2. Move it to the Selected protocols by pressing
.
Î The required protocols re listed in the field Selected protocols.
The order of configuration windows depends on the order of the protocols in the selected protocols list.
I.e. if the order of the protocols is TCP/IP, SMS, and CID so the first configuration window will be
Internet configuration, the second will be SMS configuration, etc…
3. Click the button.
Î The modem status is displayed (in the following Fig. the firmware version of
the IGS6-10, the operator and the RSSI level):