Technical data

Configure the unit

Siemens Building Technologies

Fire Safety & Security Products 12.2007

6.3.2 Remote mode configuration

Disconnect the master unit (the modem you are dialing from) from the keypad bus of the IC60.

Fig. 3 Configuration method: Remote mode configuration

Prerequisites:

z The SIM card has been inserted in both modems.

z A network connection is established.

z The access code is available.

Before making a remote configuration, a local configuration has to be made using the USB cable (see

chapter 6.4.1: Local control via COM).

1. Start the program.

2. Press the button Control modem via Data Link (see

Fig. 1, page 12).

3. Enter the phone number of the "far end" unit (the one that will be configured

remotely),

4. Enter the password.

5. Press Next.

Î The modem is dialing (see also Fig. 3):