Specifications

AT Command Set
TC3X_ATC_01_V04.00 Page 9 of 204 29.05.2002
4.2 58 AT+CALA Alarm mode not applicable to TC35 Terminal.
RTC initialization after wake-up into Alarm mode
described.
4.5 63 AT+CBST Transmission rate 14400 bps now supported.
4.6 64 AT+CCFC Description revised, examples added
4.7 67 AT+CCLK RTC initialization after wake-up into Alarm mode
described
4.9 69 AT+CFUN Chapter revised
4.15 73 AT+CHUP Note added: AT+CHUP implemented like ATH
4.18 75 AT+CLCK Description revised, examples for phone security lock
types and call barring added
4.22 84 AT+CMEE Setting not saved when ME is powered down
4.24 86 AT-CMUX Overview on Multiplex mode updated
4.24.1 87 AT+CMUX Restrictions on Multiplex mode updated
4.26 90 AT+COPS Chapter revised
4.28 93 AT+CPBR Description revised, examples added
4.31 / 4.31.1 96 / 99 AT+CPIN Description revised. Summary of actions to be taken
after authentication failure
4.32 101 AT+CPIN2 Description revised, examples added
4.34 104 AT+CPWD Description revised, examples added
4.37 108 AT+CREG Description revised, examples added
5.15 141 AT+CSMP Command syntax corrected, first parameter
mandatory
6.5 148 AT^SBC Default setting of <current> described
Automatic shutdown explained in more detail
6.7 152 AT^SCKS URC not stored when ME is powered down
6.19 162 AT^M20 Description revised
7.1.5- 7.1.14 181 - 193 Several AT+CEER location Ids and release causes added
7.1.3 185 URCs Further explanations relating to URCs
7.2 / 7.3 194/196 Usability of AT commands with or without PIN authentication: Both lists
updated