Specifications

AT Command Set
TC3X_ATC_01_V04.00 Page 171 of 204 29.05.2002
6.31 AT^SPBS Steps the selected phonebook alphabetically
This command can be used to flick through the active phonebook records in alphabetical order by
name.
CAUTION: The AT^SBPS command is intended for reading only. For example, it helps you find
entries starting with matching characters. However, do not use the listed index numbers to dial out
or modify entries.
Test command
AT^SPBS=?
Response
^SPBS: (list of supported <value>s)
OK
Parameter
See write command
Write command
AT^SPBS=
<value>
Parameter
<value> 1 to make a step downward in the alphabetically sorted phonebook
2 to make a step upward in the alphabetically sorted phonebook
Response
If <value>=1
TA steps down one entry.
^SPBS: <index2>,<number>,<type>,<text> <CR,LF>
^SPBS: <index3>,<number>,<type>,<text> <CR,LF>
^SPBS: <index4>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK
If <value>=2 (after <value>=1)
TA steps up one entry.
^SPBS: <index1>,<number>,<type>,<text> <CR,LF>
^SPBS: <index2>,<number>,<type>,<text> <CR,LF>
^SPBS: <index3>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK
If error is related to ME functionality:
+CME ERROR: <err>
The response parameters are explained in the specification of the “AT^SPBG”
command.
Reference
Siemens
Note
This command can be used for the ME, SM and FD phonebook.