Specifications

AT Command Set
TC3X_ATC_01_V04.00 Page 101 of 204 29.05.2002
4.32 AT+CPIN2 Enter PIN2
Test command
AT+CPIN2=?
Response
OK
Read command
AT+CPIN2?
Response
TA returns an alphanumeric string indicating whether some password is required
or not.
+CPIN2: <code> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<code> READY ME is not pending for any password
SIM PIN2 ME is waiting for SIM PIN2.
This <code> is returned only when PIN2
authentication has not yet been done or has failed
(+CME ERROR:17).
SIM PUK2 ME is waiting for SIM PUK2.
This <code> is returned only when PIN2
authentication has failed and ME is pending for
SIM PUK2 (i.e. +CME ERROR:18).
Write command
AT+CPIN2=
<pin>[,<new
pin>]
Response
The write command lets the ME store the entered password. This may be for
example the SIM PIN2 to benefit from the features listed below, or the SIM PUK2
to replace a disabled PIN2 with a new one. Note that PIN2 can only be entered if
PIN1 authentication was done.
OK
If error is related to ME functionality:
+CME ERROR: <err>
If the ME is requesting SIM PUK2, use <pin> to enter the PUK2, followed by
<newpin> to specify your new PIN2.
Parameter
<pin> password (string type), usually SIM PIN2 or, if requested, SIM PUK2
<new pin> if the requested code was SIM PUK2: new password (PIN2.
See Chapter 4.31.1 for more information about when you may need
to enter the PUK.
Reference Note
Functions accessible only after PIN2 authentication:
· AT+CACM: Accumulated call meter (ACM) reset or query
· AT+CAMM: Accumulated call meter maximum (ACMmax) set or query
· AT+CLCK: Facility lock to "FD" (Fixed dialling phonebook)
· AT^SLCK: Facility lock to "FD" (Fixed dialling phonebook)
· AT+CPWD: Change "P2"password
· AT^SPWD: Change "P2"password
· AT+CPUC: Price per unit and currency table
· AT+CPIN2: Enter SIM PIN2 or SIM PUK2 if requested.
For example, SIM PIN2 will be needed when you attempt to edit the "FD"
phonebook and ME returns +CME Error 17 or +CPIN: SIM PIN2.