Specifications

TC35i AT Command Set

11.10 AT+CNMA

obil

TC35i_ATC_V02.07 Page 292 of 439 1/30/04

Confidential / Released

Notes

• The execute / write command shall only be used when AT+CSMS parameter <service> equals 1 (= phase

2+).

• Both the execute and the write command can be used no matter whether text mode or PDU mode is activated.

• If multiplex mode is activated (

AT+CMUX=0) the AT+CNMI parameter will be set to zero on all channels, if one

channel fails to acknowledge an incoming message within the required time.