Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 99/145 02.10 / 23.05.2001
to wait for the ">" symbol and only afterwards the text can be sent to
the module
5. With baudrates lower than 19200 it is recommended to use the line
termination character only (refer to +ATS3, default <CR>, pg. 21) before
entering the text/pdu. Use of the line termination character followed by
the response formating character (refer to +ATS4, default <LF>, pg. 21)
can cause problems.
5.8 AT+CMSS Send SMS message from storage
Test command
AT+CMSS=?
Response
OK
Parameter
Execute command
+CMSS=
<index>[,<da>
[,<toda>]]
Response
TA sends message with location value <index> from message storage
<mem2> to the network (SMS-SUBMIT or SMS-COMMAND). If new recipi-
ent address <da> is given for SMS-SUBMIT, it shall be used instead of the
one stored with the message. Reference value <mr> is returned to the TE
on successful message delivery. Values can be used to identify message
upon unsolicited delivery status report result code.
1) If text mode (+CMGF=1) and send successful:
+CMSS: <mr>[,scts>] OK
2) If PDU mode (+CMGF=0) and send successful:
+CMSS: <mr>[,ackpdu>] OK
3) If error is related to ME functionality:
+CMS ERROR: <err>
Parameter
<ackpdu> GSM 03.40 RP-User-Data element of RP-ACK PDU; format is
same as for <pdu> in case of SMS, but without GSM 04.11 SC
address field and parameter shall be bounded by double quote
characters like a normal string type parameter.
<index> integer type; value in the range of location numbers supported
by the associated memory
<da> GSM 03.40 TP-Destination-Address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <toda>
<scts> GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format.
<toda> GSM 04.11 TP-Destination-Address Type-of-Address octet in
integer format (when first character of <da> is + (IRA 43) default
is 145, otherwise default is 129)
<mr> GSM 03.40 TP-Message-Reference in integer format
Reference
GSM 07.05
Note