Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 83/145 02.10 / 23.05.2001
4.40 AT+CSCS Set TE character set
Test command
AT+CSCS=?
Response
+CSCS: (list of supported <chset>s)
OK
Read command
AT+CSCS?
Response
+CSCS: <chset>
OK
Write command
AT+CSCS=[<ch
set >]
Response
Write command informs TA which character set <chset> is used
by the TE. TA is then able to convert character strings cor-
rectly between TE and ME character sets.
OK
Parameters
<chset>:
"GSM" GSM default alphabet (GSM 03.38 subclause 6.2.1);
Note: This setting may cause software flow control problems
due to values of XON/XOFF characters.
"UCS2" 16-bit universal multiple-octet coded character set
(ISO/IEC10646 [32]); UCS2 character strings are converted to
hexadecimal numbers from 0000 to FFFF; e.g.
"004100620063" equals three 16-bit characters with decimal
values 65, 98 and 99, $(AT R97)$
Reference
GSM 07.07
Note
1) Also see chapter „Supported character sets“, pg. 10.
2) When TA-TE interface is set to 8-bit operation and used TE alphabet is 7-bit,
the highest bit will be set to zero.