Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 72/145 02.10 / 23.05.2001
4.29 AT+CPBS Select phonebook memory storage
Test command
AT+CPBS=?
Response
+CPBS: (list of supported <storage>s) OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See write command
Read command
AT+CPBS?
Response
TA returns currently selected memory
+CPBS: <storage>,<used>,<total> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See write command
Write command
AT+CPBS=
<storage>
Response
TA selects current phonebook memory storage, which is used by other
phonebook commands.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<storage>
“SM” SIM phonebook (SM Phonebook storage depends on the SIM-Card
“FD” SIM fixdialling-phonebook (FD Phonebook storage pos.1-7)
“LD” SIM last-dialling-phonebook (+CPBW not be applicable for this
storage) (LD Phonebook storage pos.1-10)
“MC” ME missed (unanswered received) calls list (+CPBW not applicable
for this storage) (MC Phonebook storage pos.1-10)
“RC” ME received calls list (+CPBW not applicable for this storage) (RC
Phonebook storage pos.1-10)
“ON” SIM (or ME) own numbers (MSISDNs) list
“ME”ME Phonebook ME Phonebook storage pos.1-50
<used> Integer type value indicating the number of used locations in selected
memory
<total> Integer type value indicating the total number of used locations in
selected memory
Reference
GSM 07.07
Note
This command can be used right after power-on to get selected <storage>. Since
data needs to be loaded from the SIM, values of <used> and <total> might not be
avaible during the first 20 seconds.