Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 38/145 02.10 / 23.05.2001
3.8 AT+FDCC Query or set capabilities
Test command
AT+FDCC =?
This command allows the connected application to sense and constrain the capa-
bilities of the facsimile DCE (=ME), from the choices defined in CCITT T.30 Table
2.
Response
(list of <VR>s), (list of <BR>s), (list of <WD>s), (list of <LN>s), (list of <DF>s), (list
of <EC>s), (list of <BF>s), (list of <ST>s)
OK
Parameter
VR: Vertical Resolution, BR: Bit Rate, WD: Page Width, LN: Page Length, DF:
Data Compression Format, EC: Error Correction Mode, BF: Binary File Transfer
Mode, ST: Scan Time/Line.
Note: For further information see AT+FDIS, pg. 40
Read command
AT+FDCC?
Response
<dcc> OK
Parameter
See write command
Write command
AT+FDCC=<VR
>,<BR>,<WD>
,<LN>,<DF>,<
EC>,<BF>,<ST
>
Response
OK
Parameter
VR: Vertical Resolution, BR: Bit Rate, WD: Page Width, LN: Page Length, DF:
Data Compression Format, EC: Error Correction Mode, BF: Binary File Transfer
Mode, ST: Scan Time/Line.
Note: For further information see AT+FDIS, pg. 40
Reference
EIA PN-2388
Note
Used for Faxclass 2 only