Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 23/145 02.10 / 23.05.2001
2.23 ATS6 Set pause before blind dialling
Read command
ATS6?
Response
<n> OK
Write command
ATS6=<n>
No effect for GSM
Response
OK
Parameter
<n> 000-255 number of seconds to wait before blind dial-
ling.
Reference
V.25ter
Note
2.24 ATS7 Set number of seconds to wait for connection completion
Read command
ATS7?
Response
<n> OK
Write command
ATS7=<n>
This parameter setting determines the amount of time to wait for the connection
completion when answering or originating a call.
Response
OK
Parameter
<n> 000 – 060 no. of seconds to wait for connection completion.
Reference
V.25ter
Note
Values bigger than 60 cause no error, but <n> will be set down to maximum
value of 60.
2.25 ATS8 Set number of seconds to wait for comma dial modifier
Read command
ATS8?
Response
<n> OK
Write command
ATS8=<n>
No effect for GSM
Response
OK
Parameter
<n> 000 no pause when comma encountered in dial
string
002 Default value
01-255 number of seconds to wait
Reference
V.25ter
Note