Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 20/145 02.10 / 23.05.2001
2.13 ATI Display product identification information
Execute command
ATI
Response
ME issues product information text
SIEMENS
TC35
REVISION x.yy
OK
Explanation of „Revision“ parameter:
Version x and variant yy of software release.
Reference
V.25ter
Note
2.14 ATL Set monitor speaker loudness
Execute command
ATL[val]
Response
OK
Reference
V.25ter
Note
1. Commands ATL and ATM are implemented only for V.25ter compatibility
reasons, no action takes place.
2. In multiplex mode the command is supported on logical channel 1 only.
2.15 ATM Set monitor speaker mode
Execute command
ATM[val]
Response
OK
Reference
V.25ter
Note
1. Commands ATL and ATM are implemented only for V.25ter compatibility
reasons, no action takes place.
2. In multiplex mode the command is supported on logical channel 1 only.
2.16 ATO Switch from command mode to data mode
Execute command
ATO[n]
Response
TA resumes the connection and switches back from command mode to data mo-
de.
If connection is not successfully resumed
NO CARRIER
or
TA returns to data mode from command mode CONNECT <text>
Note: <text> output only if +ATX parameter setting with value > 0.
Parameter
<n> 0 switch from command mode to data mode
Reference
V.25ter
Note