Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 18/145 02.10 / 23.05.2001
2.10 ATDL Redial last telephone number used
Execute command
ATDL[;]
Response
TA attempts to set up an outgoing call to stored number.
Note: This command may be aborted generally by receiving a character during
execution. This command cannot be aborted in some connection setup
states, such as handshaking.
If there is no last number or number is not valid:
+CME ERROR
or:
If no dialtone (parameter setting ATX2 or ATX4)
NO DIALTONE
If busy (parameter setting ATX3 or ATX4)
BUSY
If a connection cannot be set up
NO CARRIER
If successfully connected and non-voice call
CONNECT<text>
Note: <text> output only if +ATX parameter setting with value > 0.
TA switches to data state.
When TA returns to command mode after call release
OK
If successfully connected and voice call
OK
Parameter
<;> voice call
Reference
V.25ter
Note
In case of voice calls “;” is necessary.