Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 17/145 02.10 / 23.05.2001
2.9 ATDI Mobile originated call to dialable ISDN number <n>
Execute command
ATDI<n>[;]
Response
TA attempts to set up an outgoing call to ISDN number.
Note: This command may be aborted generally by receiving a character during
execution. This command cannot be aborted in some connection setup states,
such as handshaking.
If no dialtone (parameter setting ATX2 or ATX4)
NO DIALTONE
If busy (parameter setting ATX3 or ATX4)
BUSY
If a connection cannot be set up
NO CARRIER
If successful connected and non-voice call
CONNECT<text> ´
Note: <text> output only if +ATX parameter setting with value > 0.
TA switches to data state.
When TA returns to command mode after call release
OK
If successfully connected and voice call
OK
Parameter
<n> [+]<d> phone number
string with maximum length of 20 characters
+ international dialling format
<d> ISDN number
string of digits: +,0-9, A, B, C
<;> voice call
Reference
V.25ter
Note