Specifications

AT Command Set

TC35-ATC-01-V02.10 Page 16/145 02.10 / 23.05.2001

2.8 ATD><str> Originate call to phone number in memory with corre-

sponding field

Execute command

ATD><str>[mgs

m][;]

Response

TA attempts to set up an outgoing call to stored number.

The current phonebook, set by AT+CPBS, is searched for the entry <str>.

Note: This command may be aborted generally by receiving a character during

execution. It can´t be aborted in some connection setup states, such as

handshaking.

If error is related to ME functionality

+CME ERROR: <err>

If no dialtone (parameter setting ATX2 or ATX4)

NO DIALTONE

If busy (parameter setting ATX3 or ATX4)

BUSY

If a connection cannot be set up

NO CARRIER

If successfully connected and non-voice call

CONNECT<text>

Note: <text> output only if +ATX parameter setting with value > 0.

TA switches to data state.

When TA returns to command mode after call release

If successfully connected and voice call

Parameter

<str> string type value (“x”), which should equal an alphanumeric field in at least

one phonebook entry in the searched memories; used character set should

be the one selected with Select TE Character Set +CSCS. <str> can con-

tain escape sequences as described in chapter „Supported character sets“,

pg. 10. <str> must be wrapped in quotation marks (""), if escape sequences

or parameter <mgsm> are used. If not, quotation marks are optional.

<mgsm> I CLIR activation

i CLIR suppression

<;> voice call, return to command state

Reference

V.25ter/GSM

07.07

Note

Command is not supported for data calls!