Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 143/145 02.10 / 23.05.2001
7.9 List of *# codes
The following commands can be used with ATD (for voice calls only, i.e. use ´;´)
*# code Functionality
Possible response(s)
*#06# Query IMEI: <IMEI> OK
**04[2]*oldPin*newPin[2]*newPin[2]# Change SIM pwd:
**05[2]*unblKey*newPin[2]*newPin[2]# Change/Unblocking SIM pwd:
*[*]03*[ZZ]*oldPw*newPw*newPw# Registration of net password:
+CME ERROR: <err> /
OK
*#30# Interrogation CLIP +CLIP : <n>,<m> OK (p 63)
*#31# Interrogation CLIR +CLIR : <n>,<m> OK (p 64)
*#76# Interrogation COLP +COLP : 0,<m> OK
*#77# Interrogation COLR +COLR : 0,<m> OK
(choice of *,#,*#,**,##)21*DN*BS# Act/deact/int/reg/eras CFU
(choice of *,#,*#,**,##)67*DN*BS# Act/deact/int/reg/eras CF busy
(choice of *,#,*#,**,##)61*DN*BS*T# Act/deact/int/reg/eras CF no reply
(choice of *,#,*#,**,##)62*DN*BS# Act/deact/int/reg/eras CF no reach
(choice of *,#,*#,**,##)002*DN*BS*T# Act/deact/int/reg/eras CF all
(choice of *,#,*#,**,##)004*DN*BS*T# Act/deact/int/reg/eras CF all cond.
^SCCFC : <reason>, <status>, <class> [,...]
like +CCFC *
)
(p 53)
(choice of *,#,*#)43*BS# Activation/deactivation/int WAIT +CCWA : <status>, <class> *
)
(choice of *,#,*#)33*Pw*BS# Act/deact/int BAOC
(choice of *,#,*#)331*Pw*BS# Act/deact/int BAOIC
(choice of *,#,*#)332*Pw*BS# Act/deact/int BAOIC exc.home
(choice of *,#,*#)35*Pw*BS# Act/deact/int. BAIC
(choice of *,#,*#)351*Pw*BS# Act/deact/int BAIC roaming
#330*Pw*BS# Deact. All Barring Services
#333*Pw*BS# Deact. All Outg.Barring Services
#353*Pw*BS# Deactivation. All Inc.Barring Services
^SCLCK : <fac>, <status>, <class> [, ...] like
+CLCK *
)
(p 60)
[C]...[C]# Send USSD message +CME ERROR: <err> /
OK
C[C] in call Call hold and multiparty +CME ERROR: <err> /
OK
C[C] (excluded 1[C]) Send USSD message +CME ERROR: <err> /
OK
Meaning of Abbreviations:
ZZ type of supplementary services: Barring services 330
All services ----
DN dialling number: string of digits 0-9
BS basic service: Voice 11
Sms 16
Fax 13
Sms+fax 12
Voice+fax 19
Voice+sms+fax 10
Data circuit asyncron 25
Data circuit syncron 24
PAD 27
packet 26
data circuit async.+PAD 21
data circuit sync.+packet 22
data circ.async+sync.+PAD+packet 20
all services ----
T time in seconds
Pw net password
C character of TE character set
*) ^SCCFC, ^SCCWA, ^SCLCK: The output depends on teleservices which are coded in <class>. If no teleservice or bearer service
is active for a given interrogation a “7” is generated as default value for the <class> parameter. In addition only for every active
class in the network one output line will be created. ^SCCFC and ^SCLCK are modified by giving an additional <reason> or <fac>
in front of the regular output string generated by the standard commands +CCFC and +CLCK.
+COLP, +COLR: <m>
0 not active
1 active
+CCWA: <status>
0 not active
1 active
<class>
like +ccfc <class> (p 53)