Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 131/145 02.10 / 23.05.2001
6.33 AT^SPWD Change password for a lock (including locks defined by
Siemens AG)
Test command
AT^SPWD=?
Response
^SPWD: (list of supported (<fac>, <pwdlength>)s) OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<fac> “P2” PIN2
otherwise see write command without “FD”
<pwdlength> integer, max. length of password
Write command
AT^SPWD =
<fac>, <oldp-
wd>,
<newpwd>
Parameter
<fac> “SC” SIM card (PIN)
“AO” BAOC ( Bar All Outgoing Calls)
“OI” BOIC ( Bar Outgoing International Calls)
“OX” BOIC-exHC ( Bar Outgoing International Calls except to Home
Country)
“AI” BAIC ( Bar All Incoming Calls)
“IR” BIC-Roam ( Bar Incoming Calls when Roaming outside the home
country)
“AB” All Barring services
“AG” All outGoing barring services
“AC” All inComing barring services
“P2” PIN 2
“PS” Phone locked to SIM (device code)
“PF” lock Phone to the very first SIM card
“PN” Network Personalisation
“PU” Network subset Personalisation
“PP” Service Provider Personalisation
“PC” Corporate Personalisation
<oldpwd> password specified for the facility from the user interface
or with command. If an old password has not yet been
set, <oldpwd> is not to enter.
if <fac> = “SC” then PIN
if <fac> = “AO”...”AC” (barring) then network
password
if <fac> = “P2” then PIN2
<newpwd> new password
Response
Facility locks: AO, OI, OX, AI, IR, AB, AG, AC, have the the same ME <password>
to lock and unlock. The <password> depends on the network provider.
TA sets a new password for the facility lock function.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Reference
Siemens
Note
See also GSM 07.07: AT+CPWD