Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 129/145 02.10 / 23.05.2001
6.29 AT^SPIC Display PIN counter
Test command
AT^SPIC=?
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
Execute command
AT^SPIC
TA returns the number of attempts still available for entering the required
password.
Note: Use command “AT+CPIN?” to check if password entry is currently required.
Response
^SPIC: <counter> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<counter> Number of attempts still available for entering the required password.
Reference
Siemens
Note
6.30 AT^SPLM Read the PLMN list
Test command
AT^SPLM=?
Response
OK
Parameter
See execute command
Execute command
AT^SPLM
Response
TA returns the list of operator names from the ME. Each operator code <nu-
mericn> that has an alphanumeric equivalent <alphan> in the ME memory is re-
turned.
^SPLM: numeric <numeric1>,long alphanumeric <alpha1><CR><LF>
^SPLM:.....OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<numericn> string type; operator in numeric form; GSM location area identifica-
tion number
<alphan> string type; operator in long alphanumeric format; can contain up to
16 characters
Reference
Siemens
Note
See also GSM 07.07: +COPN, +COPS