Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 128/145 02.10 / 23.05.2001
6.28 AT^SPBS Steps the selected phonebook alphabetically
Test command
AT^SPBS=?
Response
^SPBS: (list of supported <value>s)
OK
Parameter
See write command
Write command
AT^SPBS=
<value>
Parameter
<value> 1 to make a step downward in the alphabetically sorted phonebook
2 to make a step upward in the alphabetically sorted phonebook
Response
if <value>=1
TA steps down one entry.
^SPBS: <index2>,<number>,<type>,<text> <CR,LF>
^SPBS: <index3>,<number>,<type>,<text> <CR,LF>
^SPBS: <index4>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK
if <value>=2 (after <value>=1)
TA steps up one entry.
^SPBS: <index1>,<number>,<type>,<text> <CR,LF>
^SPBS: <index2>,<number>,<type>,<text> <CR,LF>
^SPBS: <index3>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK
If error is related to ME functionality:
+CME ERROR: <err>
The parameters in the response are explained in the specification of the
“AT^SPBG” command.
Reference
Siemens
Note
This command can be used for the ME, SM and FD phonebook.