Specifications

AT Command Set
TC35-ATC-01-V02.10 Page 110/145 02.10 / 23.05.2001
6.3 AT^MONP Monitor neighbour cells
Test command
AT^MONP=?
Response
^MONP: (list of supported < period >s) OK
Write command
AT^MONP=[<p
eriod>]
This command is used to output neighbour cell information periodically. It is can-
celled by any character sent to serial port except if autobauding is enabled
(+IPR=0). Then type character ´a´ to abort.
Response
See execute command
Parameter
<period> 1 – 254 Display period in seconds
Execute command
AT^MONP
This command is used to output neighbour cell information one time.
Response (Example)
At^monp
Chann rs dBm PLMN BCC C1 C2
29 22 -70 26201 2 33 33
31 21 -72 26201 2 31 31
27 19 -75 26201 0 28 28
47 19 -76 26201 2 27 27
32 18 -77 26201 7 26 26
124 17 -79 26201 2 24 24
OK
Parameter:
Chann Channel number
rs RSSI value (063)
dBm Receiving level in dBm
PLMN PLMN ID code
BCC Base Station colour code
C1 coefficient for base station selection
C2 coefficient for base station selection
Reference
Siemens
Note
As a result of this command the requested output may be issued by the ME at
any moment (related to <period>).
To indicate such unsolicited result codes to a connected application, the ME
usually activates it´s Ring Line (Logic "0") for one second. This is not true during
output of AT^MONI and AT^MONP.