Specifications
AT Command Set
TC35-ATC-01-V02.10 Page 102/145 02.10 / 23.05.2001
2 SMS-DELIVERs (except class 2 messages and messages in the
message waiting indication group (store message)) are routed
directly to the TE using unsolicited result code:
+CMT: ,<length><CR><LF><pdu> (PDU mode enabled)
+CMT: <oa>,, <scts> [,<tooa>, <fo>, <pid>, <dcs>, <sca>,
<tosca>, <length>] <CR> <LF> <data> (text mode enabled)
3 Class 3 SMS-DELIVERs are routed directly to the TE using
unsolicited result codes defined in <mt>=2. Messages of other data
coding schemes result in indication as defined in <mt>=1.
<bm> Rules for storing received CBMs depend on the relevant data coding
method (refer to GSM 03.38 [2]), the setting of Select CBM Types
(+CSCB) and this value:
0 No CBM indications are routed to the TE.
2 New CBMs are routed directly to the TE using unsolicited result
code: +CBM: <length><CR><LF><pdu> (PDU mode enabled) or
+CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
(text mode enabled).
3 Class 3 CBMs are routed directly to TE using unsolicited result codes
defined in <bm>=2.
<ds> 0 No SMS-STATUS-REPORTs are routed to the TE.
1 SMS-STATUS-REPORTs are routed to the TE using unsolicited
result code: +CDS: <length><CR><LF><pdu> (PDU mode
enabled) or +CDS:
<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st> (text mode
enabled)
2 If SMS-STATUS-REPORT is routed into ME/TA, indication of
the memory location is routed to the TE using unsolicited
result code: +CDSI: <mem>,<index>
<bfr> 1 TA buffer of unsolicited result codes defined within this
command is cleared when <mode> 1...3 is entered.
Unsolicited result code
+CMTI: <mem>,<index> Indication that new message has been re-
ceived
+CBMI: <mem>,<index> Indication that new CB-message has been
received
+CMT: ,<length><CR><LF><pdu> Short message is output directly
+CBM: <length><CR><LF><pdu> Cell broadcast message is output directly
During each SMS or Cell Broadcast Messages the Ring Line will remain Logic „0“
for one second.
Reference
GSM 07.05
Note
Parameters <mt>=2,3 and <ds>=1 are only available with GSM phase 2+ (see
+CSMS=1).