Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 60 of 278 04.08.2003
3.8 AT+FDCC Query or set capabilities
Test command
AT+FDCC =?
This command allows the connected application to sense and constrain the
capabilities of the facsimile DCE (=ME), from the choices defined in CCITT
T.30 Table 2.
Response
(list of <VR>s), (list of <BR>s), (list of <WD>s), (list of <LN>s), (list of <DF>s),
(list of <EC>s), (list of <BF>s), (list of <ST>s)
OK
Parameter
VR: Vertical Resolution, BR: Bit Rate, WD: Page Width, LN: Page Length, DF:
Data Compression Format, EC: Error Correction Mode, BF: Binary File Trans-
fer Mode, ST: Scan Time/Line.
Note: For further information see AT+FDIS, pg. 62
Read command
AT+FDCC?
Response
<VR>,<BR>,<WD>,<LN>,<DF>,<EC>,<BF>,<ST>
OK
Parameter
See write command
Write command
AT+FDCC=<VR>,
<BR>,<WD>,<LN>,
<DF>,<EC>,<BF>,
<ST>
Response
OK
Parameter
VR: Vertical Resolution, BR: Bit Rate, WD: Page Width, LN: Page Length, DF:
Data Compression Format, EC: Error Correction Mode, BF: Binary File Trans-
fer Mode, ST: Scan Time/Line.
Note: For further information see AT+FDIS, pg. 62
Reference
EIA PN-2388
Note
Used for Fax Class 2 only