Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 57 of 278 04.08.2003
3.3 AT+FBOR Query data bit order
Test command
AT+FBOR=?
Query the bit order for receive mode. The mode is set by the ME depending on
the selected Service Class, see “AT+FCLASS Fax: Select, read or test service
class”, pg. 58.
Response
(list of supported bit order modes <bor>s)
OK
Parameter
See write command
Read command
AT+FBOR?
Response
<bor> OK
Parameter
See write command
Write command
AT+FBOR=<bor>
Response
OK
Parameter
<bor> 0 direct bit order for both Phase C and for Phase B/D data.
[1] Reversed bit order for Phase C data, direct Bit Order for
Phase B/D data.
Reference
EIA PN-2388
Note
Used for Fax Class 2 only