Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 44 of 278 04.08.2003
2.38 AT&W Store current configuration to user defined profile
Execute command
AT&W[<n>]
TA stores the current settings to a user defined profile in the non-volatile memory.
Response
OK or if error is related to ME functionality: ERROR / +CME ERROR: <err>
Parameter
<n> [0] Number of profile
Reference
V.25ter
Note
· The user defined profile will be loaded automatically after power-up. Use ATZ
to restore the user profile and AT&F to restore factory settings. Until the first
use of AT&W, ATZ works as AT&F. See Chapter 2.32 for details on ATZ and
Chapter 2.35 for AT&F.
· User defined profiles in multiplex mode: On each channel you can save an in-
dividual profile.
Table 8: List of settings stored to user profile on multiplex channel 1
AT command Stored parameters
AT\Q <n>
ATE <value>
ATQ <n>
ATS0 <n>
ATS3 <n>
ATS4 <n>
ATS5 <n>
ATS6 <n>
ATS7 <n>
ATS8 <n>
ATS10 <n>
ATS18 <n>
ATV <value>
ATX <value>
AT&C <value>
AT&D <value>
AT&S <value>
AT+ICF <format>, <parity>
AT+IFC <TEflowcontrol>, <TAflowcontrol>
AT+ILRR <value>
AT+FCLASS <n>
AT+CBST <speed>, <name>, <ce>
AT+CLIP <n>
AT+CMEE <n>
AT+CMER <mode>, <ind>
AT+COPS <format>