Specifications

ManualsBrandsSiemens ManualsComputer equipmentTC35 Terminal

TC35i AT Command Set

Confidential / Released

TC35i_ATC_V01.05 Page 42 of 278 04.08.2003

2.37 AT&V Display current configuration

Execute command

AT&V[<n>]

TA returns the current parameter setting. The configuration varies depending on

whether PIN authentication has been done, or Multiplex mode has been acti-

vated.

Parameter

<n> [0] Profile number

Reference

V.25ter

Notes:

· The value of \Q (flow control) is also affected by the AT+IFC command (see

Chapter 2.45). If the value set by AT+IFC cannot be represented by a \Q

equivalent, \Q255 will be displayed.

· The parameters of AT^SMGO can only be displayed after the SMS data from

the SIM have been read successfully for the first time. Reading starts after

successful SIM authentication has been performed, and may take up to 30

seconds depending on the SIM used. While the read process is in progress,

an attempt to read the parameter will result in empty values.

· The parameter of AT+CSDH will only be displayed in SMS text mode, i.e. if

AT+CMGF=1.

Table 6: AT&V responses on channel 1 (with or without multiplex moded enabled)

PIN authentication done No PIN authentication

ACTIVE PROFILE:

E1 Q0 V1 X4 &C1 &D2 &S0 \Q0 \V1

S0:000 S3:013 S4:010 S5:008 S6:000 S7:060

S8:000

S10:002 S18:000

+CBST: 7,0,1

+CRLP: 61,61,78,6

+CR: 0

+FCLASS: 0

+CRC: 0

+CMGF: 0

+ CSDH: 0

+CNMI: 0,0,0,0,1

+ICF: 3

+IFC: 0,0

+ILRR: 0

+IPR: 57600

+CMEE: 2

ˆSMGO: 0,0

+CSMS: 0,1,1,1

ˆSACM: 0,”000000”,”000000”

ˆSCKS: 0,1

ˆSSET: 0

+CREG: 0,1

+CLIP: 0,2

+CAOC: 0

+COPS: 0,0,”operator”

%D: 0