Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 41 of 278 04.08.2003
2.36 AT&S Set circuit Data Set Ready (DSR) function mode
Write command
AT&S<value>
Response
This parameter determines how the TA sets circuit 107 (DSR) depending on the
communication state of the TA interfacing TE.
OK
If DSR is not supported by the interface
ERROR
Parameter
<value> 0 DSR always on.
1 TA in command mode: DSR is OFF.
TA in data mode: DSR is ON.
Reference
V.25ter
Note
Factory default is 0.