Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 39 of 278 04.08.2003
2.35 AT&F Set all current parameters to manufacturer defaults
Execute command
AT&F[value]
Response
TA sets all current parameters to the manufacturer defined profile.
OK
Parameter
<value> 0 Set all TA parameters to manufacturer default.
See Table 5: Factory settings.
Reference
V.25ter
Note
In addition to the default profile, you can store an individual one with
AT&W. To alternate between the two profiles enter either ATZ (loads
user profile) or AT&F (restores factory profile). Refer to Chapter 2.38 for
AT&W and Chapter 2.32 for ATZ.
Audio parameters set with AT^SAIC, AT^SNFA, AT^SNFO and
AT^SNFI can be restored with AT^SNFD. See Chapter 7.26.
Table 5: Factory settings
AT command Restored parameters
AT\Q <n>=0
ATE <value>=1
ATQ <n>=0
ATS0 <n>=000
ATS3 <n>=013
ATS4 <n>=010
ATS5 <n>=008
ATS6 <n>=000
ATS7 <n>=060
ATS10 <n>=002
ATS18 <n>=0
ATV <value>=1
ATX <value>=4
AT&C <value>=1
AT&D <value>=2
AT&S <value>=0
AT+ILRR <value>=0
AT+FCLASS <n>=0
AT+CBST <speed>=7, <name>=0, <ce>=1
AT+CFUN <fun>=1
AT+CLIP <n>=0
AT+CMEE <n>=0
AT+CMER <mode>=0, <keyp>=0, <disp>=0, <ind>=0, <bfr>=0
AT+COPS <format>=0
AT+CPBS <storage>=”SM”
AT+CR <mode>=0
AT+CRC <mode>=0