Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 33 of 278 04.08.2003
2.21 ATS3 Write command line termination character
Read command
ATS3?
Response
<n> OK
Write command
ATS3=<n>
This parameter setting determines the character recognized by TA to terminate
an incoming command line.
Response
OK
Parameter
<n> 000-013-127 command line termination character
Reference
V.25ter
Note
Using other value than 13 can cause problems when entering commands.
2.22 ATS4 Set response formatting character
Read command
ATS4?
Response
<n> OK
Write command
ATS4=<n>
This parameter setting determines the character generated by the TA for result
code and information text.
Response
OK
Parameter
<n> 000-010-127 response formatting character.
Reference
V.25ter
Note
2.23 ATS5 Write command line editing character
Read command
ATS5?
Response
<n> OK
Write command
ATS5=<n>
This parameter setting determines the character recognized by TA as a request
to delete the immediately preceding character from the command line.
Response
OK
Parameter
<n> 000-008-127 command line editing character
Reference
V.25ter
Note
2.24 ATS6 Set pause before blind dialing
Read command
ATS6?
Response
<n> OK
Write command
ATS6=<n>
No effect for GSM
Response
OK
Parameter
<n> 000-255 number of seconds to wait before blind dialing.
Reference
V.25ter
Note