Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 28 of 278 04.08.2003
2.10 ATDL Redial last telephone number used
Execute command
ATDL[;]
This command redials the last voice and data call number used in the ATD com-
mand.
· To redial the last data call number simply enter ATDL
· To redial the last voice call number type ATDL;
The command may be aborted generally by receiving a character during execu-
tion. Abortion is not possible during some states of connection setup such as
handshaking.
Response
If there is no last number or number is not valid:
+CME ERROR
If no dialtone (parameter setting ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If a connection cannot be set up:
NO CARRIER
If successfully connected and non-voice call:
CONNECT<text> TA switches to data state.
Note: <text> output only if +ATX parameter setting with value > 0.
When TA returns to command mode:
OK
If successfully connected and voice call:
OK
Parameter
<;> voice call
Reference
V.25ter
Note
· See ATX command in Chapter 2.31 for setting result code and call monitoring
parameters. Refer to Chapter 8.1.4 for <text>.
· The last 10 dialed voice call numbers are also stored in the “LD” phonebook.
See Chapter 4.33.