Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 27 of 278 04.08.2003
2.9 ATDI Mobile originated call to dialable ISDN number <n>
Execute command
ATDI<n>[;]
TA attempts to set up an outgoing call to ISDN number.
This command may be aborted generally by receiving a character during execu-
tion. Abortion is not possible during some states of connection setup such as
handshaking.
Response
If no dialtone (parameter setting ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If a connection cannot be set up:
NO CARRIER
If successful connected and non-voice call:
CONNECT<text> TA switches to data state.
Note: <text> output only if +ATX parameter setting with value > 0.
When TA returns to command mode:
OK
If successfully connected and voice call:
OK
Parameter
<n> [+]<d> phone number
string with maximum length of 20 characters
+ international dialing format
<d> ISDN number
string of digits: +,0-9, A, B, C
<;> voice call
Reference
V.25ter
Note
See ATX command in Chapter 2.31 for setting result code and call monitoring pa-
rameters. Refer to Chapter 8.1.4 for <text>.