Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 259 of 278 04.08.2003
8.1.4 Result codes
Indication Numeric Meaning
OK 0 Command executed, no errors, Wake up after reset
CONNECT 1 Link established
RING 2 Ring detected
NO CARRIER 3 Link not established or disconnected
ERROR 4 Invalid command or command line too long
NO DIALTONE 6 No dial tone, dialing impossible, wrong mode
BUSY 7 Remote station busy
CONNECT 2400 10 Link with 2400 bps
CONNECT 4800 30 Link with 4800 bps
CONNECT 9600 32 Link with 9600 bps
CONNECT 14400 33 Link with 14400 bps
CONNECT 2400/RLP 47 Link with 2400 bps and Radio Link Protocol
CONNECT 4800/RLP 48 Link with 4800 bps and Radio Link Protocol
CONNECT 9600/RLP 49 Link with 9600 bps and Radio Link Protocol
CONNECT 14400/RLP 50 Link with 14400 bps and Radio Link Protocol
ALERTING Alerting at called phone
DIALING Mobile phone is dialing