Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 258 of 278 04.08.2003
Message Meaning How to activate
URC
+CIEV: <text> Reports changes from indicators listed in
the AT+CIND command specification.
Buffer CIEV unsolicited result codes in
the TA when TA-TE link is reserved (e.g.
in on-line data mode) and flush them to
the TE after reservation. Otherwise for-
ward them directly to the TE.
AT+CMER=2,0,0,2
+CIEV: <text> Reports changes from indicators listed in
the AT+CIND command specification.
forward CIEV unsolicited result codes di-
rectly to the TE; TA-TE link specific in-
band technique used to embed result
codes and data when TA is in on-line
data mode
AT+CMER=3,0,0,2
+CCWA: <number>,<type>,
<class>,,<CLI validity>
Call waiting indication (for data calls, pa-
rameter <class> states the actual bearer
service group, with a <class> value be-
tween 16 and 128)
AT+CCWA=1,1,<cla
ss>
^SCWA: Indicate that a waiting call has been re-
ceived while ME was engaged in a CSD
call, but that this waiting call was hang
up by the other part before ME went
back to command mode.
AT+CCWA=1,1,<cla
ss>
+CUSD:<m>[,<str>,<dcs>
(Unstructured supplementary ser-
vice data)
USSD response from the network after a
mobile originated or network initiated ac-
tion.
AT+ CUSD=1
^SSIM READY Reading of SMS and phone books from
SIM is completed
AT^SSET=1
Table 19: Summary of Fax Class 2 URCs defined by EIA PN-2388
Message
Meaning
+FCON
Indicates connection with a fax machine
+FNSF:<param>
Reports non-standard setup frame
+FTSI:"<id>"
Reports the remote ID, transmit station ID
+FCSI:"<id>"
Reports the remote ID, called station ID
+FDCS:<VR>,<BR>,<WD>,<LN>,
<DF>,<EC>,<BF>,<ST>
Reports the current session parameter
(refer to EIA PN-2388, table 3.10)
+FDIS:<VR>,<BR>,<WD>,<LN>,
<DF>,<EC>,<BF>,<ST>
Reports the remote station capabilities
(refer to EIA PN-2388, table 3.10)
+FHNG:<stat>
Reports call terminated with status
+FPTS:<stat>
Reports received page status
+FET:<stat>
Reports post page message