Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 248 of 278 04.08.2003
7.49 AT^STCD Display Total Call Duration
Test command
AT^STCD=?
Response
OK
Execute command
AT^STCD
Response
TA returns total call duration (accumulated duration of all calls)
^STCD: <time> OK
Parameter
<time> string type value; format is "hh:mm:ss", where characters indicate
hours, minutes, seconds; E.g. 22:10:00 “22:10:00"
max value is 9999:59:59
Reference
Siemens
Note
The Total Call Duration will not be reset by power off or other means.
7.50 AT\V Set CONNECT result code format
This command formats the CONNECT response indicated in case of successfully connected circuit
switched data calls.
Execute command
AT\V[<value>]
Response
OK
ERROR
Parameter
<value> [0] CONNECT<text> result code returned without RLP trailer
1 CONNECT<text> result code returned with RLP trailer
Reference
SIEMENS
Note:
· For circuit switched data calls only.
· Output only if ATX parameter is set with value > 0 (see ATX).