Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 245 of 278 04.08.2003
7.46 AT^SSET Settings for Unsolicited Result Code "SIM READY"
Test command
AT^SSET =?
Response
^SSET: (list of supported <n>s) OK
Parameter
See write command
Read command
AT^SSET?
Response
^SSET: <n> OK
Parameter
See write command
Write command
AT^SSET=
[<n>]
The Write command serves to set the presentation mode of the unsolicited result
code.
Response
OK
Parameter
<n> SIM ready presentation mode
0 disable
1 enable
Using AT&W, the current settings for AT^SSET can be stored to the user defined
profile. It is possible to assign different settings to different multiplexer channels.
Reference
SIEMENS
Unsolicited result code
^SSIM READY
The URC acknowledges to the user that SMS and phone book data are accessi-
ble. It will be reported each time the ME has completed reading data from the SIM.
Reading starts after successful SIM PIN authentication (AT+CPIN), and may take
up to 30 seconds depending on the SIM used. Before that, any attempt to access
one of the phone books or to view SMS will result in “+CME ERROR: 14” (SIM
busy).
The URC ^SSIM READY” is related to all phone book commands and to the SMS
commands AT+CMGL, AT+CMGR, AT^SMGL, AT^SMGR.