Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 229 of 278 04.08.2003
<number> (string)
String type phone number in format specified by <type>. The num-
ber parameter may be an empty string.
<type> (numeric)
Type of address octet
145 Dialing string <number>includes international access code
character ’+’
209 Dialing string <number>contains printable non-alphabetic non-
digit characters saved with the number string. For further de-
tail, check the parameter descriptions for at command
AT+CPBW .
129 Otherwise
<text> (string)
Text assigned to the phone number. The maximum length of this
parameter is given in test command response <tlength>. The text
string is returned in the character set and format as specified with
AT+CSCS.
<maxindex> (numeric)
Max. index for the currently selected storage. Since it indicates the
maximum index in a sorted list, <maxindex> will always be equal
to the actual number of entries currently used in the phonebook.
<nlength> (numeric)
Max. length of phone number for ”normal” locations. Depending on
the storage, a limited number of locations with extended memory
is available per phonebook. Please refer to AT command
AT+CPBW for detail.
<tlength> (numeric)
Max. length of <text>assigned to the telephone number.
Reference
Siemens
Note
· The command can be used for the ME, SM and FD phone books.
· The AT^SPBG feature is able to sort by the first 6 matching characters only.
All the following characters will be ignored.
· This command can be used only after the phone book data from the SIM have
been read successfully for the first time. Reading starts after successful SIM
authentication has been performed, and may take up to 30 seconds depend-
ing on the SIM used. While the read process is in progress, an attempt to use
any of the phone book commands will result in “+CME Error: 14” (SIM busy).