Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 225 of 278 04.08.2003
7.33 AT^SNFW Write audio setting in non-volatile store
Test command
AT^SNFW=?
Response
OK
Execute command
AT^SNFW
TA writes the parameters currently selected in audio modes 2 – 6 to the non-
volatile store.
Response
OK
If error is related to ME functionality:
+ CME ERROR: <error>
<error> Memory failure: Can´t write to storage device.
Reference
Siemens
Note
· Execute command works only in audio mode 2 to 6.
· The audio profile saved with AT^SNFW includes the following parameters:
AT^SNFI: <inBbcGain>, <inCalibrate> (or the equivalent AT^SNFA parameters)
AT^SNFO: <outBbcGain>, <outCalibrate[0]> ... <outCalibrate[4]>, <side Tone>
AT^SAIC: <io>,<mic>,<ep>
AT^SNFS: <audMode>