Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 223 of 278 04.08.2003
at^snfw Stores the audio mode and the interface.
OK
To switch back and forth:
at^snfs=4 Switches to the handset at analog interface 2.
OK
at^snfs=2 Switches to the handsfree device at analog interface 1.
OK
Example 3
(TC35i Termi-
nal only)
To configure TC35i Terminal for handsfree operation:
First, select audio mode 2 (especially designed for handsfree devices):
at^snfs=2
OK
at^saic? Queries the current audio interface settings.
^SAIC: 2,2,2 The factory default of AT^SAIC automatically assigned to
audio mode 2 cannot be used with TC35i Terminal since
the 2
nd
audio interface is not connected. Therefore, the
default setting needs to be changed as follows:
AT^SAIC=2,1,1 Allocates the 1
st
audio interface to the selected audio
ok mode 2.
Now, store the current configuration to the user defined audio profile:
at^snfw Stores the selected audio mode and the selected inter-
face.
OK