Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 219 of 278 04.08.2003
when you change <outStep> and then select another mode with
AT^SNFS, the same step will be applied. Nevertheless, the sound qual-
ity and the amount of volume are not necessarily the same, since all
remaining audio parameters can use different values in either mode.
Audio mode 1 is fixed to <outStep>=4.
· The value of <outStep> is stored non-volatile when the ME is powered
down with AT^SMSO or reset with AT+CFUN=1,1. Any other parame-
ters changed with AT^SNFO need to be saved with AT^SNFW for use
after restart. See also AT^SNFD for details on restoring factory de-
faults.
· Caution: When you adjust audio parameters avoid exceeding the maxi-
mum allowed level. Bear in mind that exposure to excessive levels of
noise can cause physical damage to users!
· <outStep> can also be selected with AT^SNFV (see Chapter 7.32) and
AT+CLVL (see Chapter 4.24).