Specifications

TC35i AT Command Set

Confidential / Released

TC35i_ATC_V01.05 Page 2 of 278 04.08.2003

Document Name:

TC35i AT Command Set

Siemens Cellular Engines

Version: 01.05

Date: August 04, 2003

Doc Id: TC35i_ATC_V01.05

Status: Confidential / Released

General Notes

Product is deemed accepted by recipient and is provided without interface to recipient’s products. The

documentation and/or product are provided for testing, evaluation, integration and information pur-

poses. The documentation and/or product are provided on an “as is” basis only and may contain defi-

ciencies or inadequacies. The documentation and/or product are provided without warranty of any

kind, express or implied. To the maximum extent permitted by applicable law, Siemens further dis-

claims all warranties, including without limitation any implied warranties of merchantability, complete-

ness, fitness for a particular purpose and non-infringement of third-party rights. The entire risk arising

out of the use or performance of the product and documentation remains with recipient. This product is

not intended for use in life support appliances, devices or systems where a malfunction of the product

can reasonably be expected to result in personal injury. Applications incorporating the described prod-

uct must be designed to be in accordance with the technical specifications provided in these guide-

lines. Failure to comply with any of the required procedures can result in malfunctions or serious dis-

crepancies in results. Furthermore, all safety instructions regarding the use of mobile technical sys-

tems, including GSM products, which also apply to cellular phones must be followed. Siemens or its

suppliers shall, regardless of any legal theory upon which the claim is based, not be liable for any con-

sequential, incidental, direct, indirect, punitive or other damages whatsoever (including, without limita-

tion, damages for loss of business profits, business interruption, loss of business information or data,

or other pecuniary loss) arising out the use of or inability to use the documentation and/or product,

even if Siemens has been advised of the possibility of such damages. The foregoing limitations of li-

ability shall not apply in case of mandatory liability, e.g. under the German Product Liability Act, in

case of intent, gross negligence, injury of life, body or health, or breach of a condition which goes to

the root of the contract. However, claims for damages arising from a breach of a condition, which goes

to the root of the contract, shall be limited to the foreseeable damage, which is intrinsic to the contract,

unless caused by intent or gross negligence or based on liability for injury of life, body or health. The

above provision does not imply a change on the burden of proof to the detriment of the recipient. Sub-

ject to change without notice at any time. The interpretation of this general note shall be governed and

construed according to German law without reference to any other substantive law.

Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its

contents and communication thereof to others without express authorization are prohibited. Offenders

will be held liable for payment of damages. All rights created by patent grant or registration of a utility

model or design patent are reserved.