Specifications

TC35i AT Command Set

Confidential / Released

TC35i_ATC_V01.05 Page 185 of 278 04.08.2003

7.2 AT^MONI Monitor idle mode and dedicated mode

Cell information can be issued in the form of periodic outputs (depending on <period> set with the

Write command), or it can be queried directly using the Execute command.

Test command

AT^MONI=?

Response

^MONI: (list of supported < period >s) OK

Write command

AT^MONI

=<period>

The Write command can be used to retrieve information of the serving/dedicated

cell automatically every n seconds. To stop the presentation type any character.

Note:

The two header lines (see below) are output after every ten data lines.

Response

See execute command

Parameter

<period> 1 – 254 Display period in seconds

Execute command

AT^MONI

The Execute command can be used to retrieve the cell parameters of the serv-

ing/dedicated cell on request.

Note:

The length of following output lines exceeds 80 characters. Therefore a terminal

program may draw a carriage return on a screen. However, this is not part of the

response.

Response (Examples)

MS is not connected:

a) MS is camping on a cell and registered to the network:

Serving Cell I Dedicated channel