Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 158 of 278 04.08.2003
for SMS-COMMANDs:
+CMGL: <index>,<stat>,<fo>,<ct>[<CR><LF>
+CMGL: <index>,<stat>,<fo>,<ct>[...]] OK
2) If PDU mode (+CMGF=0) and command successful:
for SMS- SUBMITs and/or SMS-DELIVERs:
+CMGL: <index>,<stat>,[<alpha>],<length><CR><LF><pdu>
[<CR><LF>+CMGL: <index>,<stat>,[alpha],<length><CR><LF><pdu>
[...]] OK
3) If error is related to ME functionality:
+CMS ERROR: <err>
Parameter
<alpha> string type alphanumeric representation of <da> or <oa> corre-
sponding to the entry found in phone book; implementation of this
feature is manufacturer- specific
<ct> GSM 03.40 TP-Command-Type in integer format (default 0)
<da> GSM 03.40 TP-Destination-Address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <toda>
<data>
In case of SMS: GSM 03.40 TP-User-Data in text mode responses; format:
- if <dcs> indicates that GSM 03.38 default alphabet is used and <fo> indi-
cates that GSM 03.40 TP-User-Data-Header-Indication is not set:
ME/TA converts GSM alphabet into current TE character set ac-
cording to rules of Annex A
- if <dcs> indicates that 8-bit or UCS2 data coding scheme is used, or <fo>
indicates that GSM 03.40 TP-User-Data-Header-Indication is set:
ME/TA converts each 8-bit octet into hexadecimal numbers con-
taining two IRA characters (e.g. octet with integer value 42 is
presented to TE as two characters 2A (IRA 50 and 65))
Parameter
<dt> GSM 03.40 TP-Discharge-Time in time-string format: “yy/MM/
dd,hh:mm:ss±zz”, where characters indicate year (two last digits),
month, day, hour, minutes, seconds and time zone. For example,
6th of May 1994, 22:10:00 GMT+2 hours equals
“94/05/06,22:10:00+08”
<fo> depending on the command or result code: first octet of GSM 03.40
SMS-DELIVER, SMS-SUBMIT (default 17), SMS- STATUS-
REPORT, or SMS -COMMAND (default 2) in integer format
<length> integer type value indicating in the text mode (+CMGF=1) the length
of the message body <data> (or <cdata>) in characters; or in PDU
mode (+CMGF=0), the length of the actual TP data unit in octets
(i.e. the RP layer SMSC address octets are not counted in the
length)
If the short message format is text mode (AT+CMGF =1) and the
character set is set to ”UCS2” (see AT+CSCS) and the short mes-
sa
g
e is also coded in UCS2 then the len
g
th is
g
iven in octets in-