Specifications

TC35i AT Command Set
Confidential / Released
TC35i_ATC_V01.05 Page 139 of 278 04.08.2003
Example 2
To set password used to enable or disable barring of all outgoing calls:
AT+CPWD=”ao”,”0000”,”3333”
Example 3
To change the "PS" lock password, using the correct old password:
AT+CPWD=”PS”,”1111”,”2222” (where 1111 = old "PS" password
and 2222 = new password)
To specify a new "PS" lock password, after the old password was disabled, e.g.
after three failed attempts to enter the password (only if Master Phone Code is
available):
AT+CPWD=”PS”,”12345678”,”1111” (where 12345678 is the Master
Phone Code and 1111 is the new
password. You may also use
<newpwd> to restore the former
disabled password). This operation
deactivates the present phone lock
and sets a new one. See also
Chapter 4.35.1.
Alternatively, without giving a new password:
AT+CPWD=”PS”,”12345678” Deactivates the present phone
lock.